Loading...
Showing posts with label AU 8th (VII) Semester syllabus. Show all posts
Showing posts with label AU 8th (VII) Semester syllabus. Show all posts
AU 806 Fault Diagnosis and Trouble Shooting Syllabus AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

AU 806 Fault Diagnosis and Trouble Shooting Syllabus AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

siteowner 11:40 AM Add Comment
AU 806 Fault Diagnosis and Trouble Shooting Syllabus
 RGTU/RGPV Fault Diagnosis and Trouble Shooting Syllabus
Automobile Engineering AU 8th Semester Syllabus 

AU 806 Fault Diagnosis and Trouble Shooting Syllabus Course contents

Max. Marks-50
Min. Marks-25
 Credits-2
  T   P
  1   2
AU 804 Vehicle Body Engineering AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

AU 804 Vehicle Body Engineering AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

siteowner 11:39 AM Add Comment
 AU 804 Vehicle Body Engineering Syllabus
 RGTU/RGPV Vehicle Body Engineering Syllabus
Automobile Engineering AU 8th Semester Syllabus 

AU 804 Vehicle Body Engineering Course contents

Unit I Car Body Details: Types: Saloon, Convertibles, Limousine, Estate Van, Racing & Sports Car Visibility, Regulation, drivers visibility, test for visibility method of improving visibility & space in cars safety design equipments for car; car body construction.

Unit II Vehicle Aerodynamics: Objectives Vehicles drag and types various types of forces & moments effect of force & moments side wind effects on force & moments various body optimization, technique for minimum drag- Wind tunnel testing: flow visualization techniques, Scale model testing, component balance to measure force & moments.

Unit III Bus Body Details: Types: Mini bus, Single Decker, Double Decker, Spirit Level & Articirculated bus- bus body Layout floor height Engine location Entrance & Exit location - Sitting dimensions Construction details: Frame construction, Double skin construction - Types metals sections used Regulation Conventional & integral type construction.

Unit IV Commercial Vehicle Details: Types of body: Flat platform, Drop side, Fixed Side, Tipper body, tanker body  light commercial vehicle body types  dimension of driver seat in relation to control Drivers cab design. Unit V Body Materials, Trim & Mechanism: Steel sheet, timber, plastic, GRP, Properties of materials corrosion anticorrosion methods escalation of paint & painting process; Body trim items; body mechanisms.

Unit VI Body Loads: Idealized structure  Structural surface shear panel method Symmetric & asymmetrical vertical loads in a car longitudinal loads Different Loading situations.

References:
1. Powloski, J.; Vehicle Body Engg. Business books Ltd
2. Giles J.C; Body construction & Design; Butter worth & Co.
3. Ramalingam KK; Automobile engineering; Scitech pub
4. John Fenton; Vehicle Body Layouts & analysis, Mechanical Engg. Publication ltd. London.
5. Braithwaite, J.V.; Vehicle Body building & Drawing, Heinemanm Edn. Books Ltd. London.

List of Experiments (Please Expand it):
1. To find out forces and moments acting on vehicle body
2. Study of body construction of various vehicles
3. Study and analysis of wind loads on vehicle body
4. Study effect of body materials and painting on vehicle dynamics
AU 803 Refrigeration and Air Conditioning AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

AU 803 Refrigeration and Air Conditioning AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

siteowner 11:38 AM Add Comment
 AU 803 Refrigeration and Air Conditioning Syllabus
 RGTU/RGPV Refrigeration and Air Conditioning Syllabus
Automobile Engineering AU 8th Semester Syllabus 

 AU 803 Refrigeration and Air Conditioning Course contents

Unit-I Introduction: Principles and methods of refrigeration, freezing; mixture cooling by gas reversible expansion, throttling, evaporation, Joule Thomson effect and reverse Carnot cycle; unit of refrigeration, coefficient of performance, vortex tube & thermoelectric refrigeration, adiabatic demagnetization; air refrigeration cycles- Joule’s cycle Boot-strap cycle, reduced ambient cycle and regenerative cooling cycles.

Unit-II Vapour compression system: Vapor compression cycle, p-h and t-s diagrams, deviations from theoretical cycle, sub-cooling and super heating, effects of condenser and evaporator pressure on cop;multi-pressure system: removal of flash gas, multiple expansion & compression with flash inter cooling; low temperature refrigeration: production of low temperatures, cascade system, dry ice, production of dry ice, air liquefaction system,.

Unit-III (a) Vapour absorption system: Theoretical and practical systems such as aqua-ammonia,
electrolux & other systems; (b)  Steam jet refrigeration: Principles and working, simple cycle of
operation, description and working of simple system, (c) refrigerants: nomenclature & classification, desirable properties, common refrigeration, comparative study, leak detection methods, environment friendly refrigerants and refrigerant mixtures, brine and its properties

Unit-IV Psychrometric: Calculation of psychrometric properties of air by table and charts; psychrometric processes:  sensible heating and cooling, evaporative cooling, cooling dehumidification, heating and humidification, mixing of air stream, sensible heat factor; principle of air conditioning, requirements of comfort air conditioning, ventilation standards, infiltrated air load, fresh air load human comfort, effective temperature & chart, heat production & regulation of human body,

Unit-V Air conditioning loads: calculation of summer & winter air conditioning load, bypass factor of coil, calculation of supply air rate & its condition, room sensible heat factor, grand sensible heat factor, =effective sensible heat factor, dehumidified air quantity. Problems on cooling load calculation. Air distribution and ventilation systems


ME803 Ad Hoc Networks References: 
1. Arora CP; Refrigeration and Air Conditioning; TMH
2. Sapali SN; Refrigeration and Air Conditioning; PHI
3. Ananthanarayan; Basic Refrigeration and Air conditioning; TMH
4. Manohar Prasad; Refrigeration and Air Conditioning; New Age Pub
5. Ameen; Refrigeration and Air Conditioning; PHI
6. Pita ; Air conditioning Principles and systems: an energy approach; PHI
7. Stoecker W.F, Jones J; Refrigeration and Air conditioning; McGH, Singapore
8. Jordan RC and Priester GB Refrigeration and Air Conditioning, PHI USA
9. Arora RC; Refrigeration and Air conditioning; PHI Learning


List of Experiments (Please Expand it): Refrigeration and Air Conditioning AU/ ME 803
1. General Study of vapor compression refrigeration system.
2. General Study of Ice Plant
3. General Study and working of cold storage
4. General Study Trane Air Condition (Package Type).
5. General Study of Electrolux Refrigeration
6. General Study One tone Thermax refrigeration unit.
7. General Study of Water cooler
8. General Study of Psychrometers (Absorption type)
9. General Study of Leak Detectors (Halide Torch).
10. General Study and working of Gas charging Rig.
11. General Study of window Air Conditioner.
12. General Study and working of Vapor compression Air conditioning Test rig.
13. Experimentation on Cold Storage of Calculate COP & Heat Loss.
14. Experimentation on Vapor compression Air Conditioning test rig.
15. Changing of Refrigerant by using Gas Charging Kit.
AU 802 Vehicle Dynamics AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

AU 802 Vehicle Dynamics AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

siteowner 11:37 AM Add Comment
AU 802 Vehicle Dynamics  Syllabus
 RGTU/RGPV Vehicle Dynamics  Syllabus
Automobile Engineering AU 8th Semester Syllabus 

AU 802 Vehicle Dynamics Course contents

Unit-I Introduction to Vehicle Dynamics: Definition by SAE; vehicle control loop; mathematical modeling methods; multi-body system approach, Newtonian and Legrangian formulation, method of Investigation, stability concepts.

Unit-II Mechanics of Pneumatic Tires: Tires construction; physics of tire; traction on dry and wet surfaces, tire forces and moments, SAE recommended practice; rolling resistance of Tire Model; ride properties of Tires.

Unit-III Performance Characteristics of Road Vehicle: Equation of motion; maximum, vehicle power and transmission characteristics; prediction of vehicle performance; operating fuel economy, braking performance.

Unit-IV Handling and stability: Characteristics of road vehicle; steering geometry, steady state handling characteristics; steady state response to steering input; transient response characteristics; direction stability effects of tire; effect of mass distribution and engine location on stability and handling.

Unit-V Vehicle Ride Characteristics: Human response to vibration, vehicle ride models, road surface profile as a random function, frequency response function, evaluation of vehicle vertical vibration to ride comfort criterion.

Unit-VI Two Wheeler Dynamics: Stability & handling, vehicle motion ride control, various vehicle models, gyroscopic effect and effect of Tire and vehicle parameters on stability and handling characteristics.

References:
1. Wong; Theory of Ground Vehicle; John willey & Sons
2. Clark S.K; Mechanics of Pneumatic Tire; NBS Monograph
3. Sohlenien W; Dynamics of High Speed Vehicles; Springer N.Y.
4. Ellis J.E.R; Vehicle Dynamics; Business Book London
5. Ramalingam KK; Automobile engineering; Scitech pub
6. Giri N.K.; Automotive Mechanics

List of Experiments (Please Expand it):
1. Study of static and dynamic properties of tires
2. Study of effect of braking system on car speed down, stopping and stability
3. Study effect of vibration and noise on human comfort
4. Study effect of engine location on stability and dynamics
AU 801 (D) Simulation and Process Modeling AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

AU 801 (D) Simulation and Process Modeling AU, 8th (V) Semester Revised syllabus Automobile Engineering(AU)

siteowner 11:36 AM Add Comment
AU 801 (D) Simulation and Process Modeling Syllabus
 RGTU/RGPV Simulation and Process Modeling Syllabus
Automobile Engineering AU 8th Semester Syllabus 

AU 801 (D) Simulation and Process Modeling Course contents

Unit 1: Introduction to modeling and simulation:  Modeling and simulation methodology, system modeling, concept of simulation; gaming; static, continuous and discrete event simulation.  

Unit 2: Basic concept of probability, generation and characteristics of random variables, continuous and discrete variables and their distributions; mapping uniform random variables to other variable distributions; linear, nonlinear and stochastic models

Unit 3; Introduction to Queuing Theory: Characteristics of queuing system, Poisson's formula, birth-death system, equilibrium of queuing system, analysis of M/M/1 queues. Introduction to multiple server Queue models M/M/c Application of queuing theory in manufacturing and computer system 

Unit 4; System Dynamics modeling: Identification of problem situation, preparation of causal loop diagrams and flow diagrams, equation writing, level and rate relationship, Simulation of system
dynamics models.

Unit 5: Verification and validation: Design of simulation experiments, validation of experimental models, testing and analysis. Simulation languages comparison and selection, study of simulation software –Arena, Pro-model, SIMULA, DYNAMO, STELLA, POWERSIM. 

ME80D Simulation and Process Modeling References:
1. Law AM and Kelton WD; Simulation Modeling and Analysis; TMH 
2. Gordon G., System simulation, PHI Learningl 
3. Banks J; Hand book of Simulation; John Wiley.
4. Taha H, Operations Research; PHI.
5. Hillier FS, Liberman GJ; Introduction to OR; TMH.
6. Deo N; System Simulation with Digital Computer; PHI Learning
7. Harrell C, Ghosh B, Bowden R; Simulation Using Promodel; MG Hill
8. Seila, Ceric and Tadikmalla; Applied Simulation Modeling, Cengage 
9. Payer T., Introduction to system simulation, McGraw Hill.
10. Sushil, System Dynamics, Wiley Eastern Ltd.
11. Spriet JA; Computer Aided Modeling and Simulation, Academic Press INC; USA