BE201 Engineering Physics Syllabus Practicals RGPV/RGTU BE 1st/2nd semester Syllabus

Rajiv Gandhi Technological University, Bhopal (MP)

Course: BE201 Engineering Physics Syllabus
Branch: Common Semester BE 1st/2nd semester Syllabus

Revised Syllabus and Scheme of Examination Effective from July 2007

Related: BE201 Engineering Physics Syllabus (Theory)

List of suggestive core experiments: -
1. Biprism, Newton's Rings, Michelsons Interferometer.
2. Resolving Powers –Telescope, Microscope, and Grating.
3. G.M. Counter
4. Spectrometers-R.I., Wavelength, using prism and grating
5. Optical polarization based experiments: Brewster’s angle, polarimeter etc.
6. Measurements by LASER-Directionality, Numerical aperture, Distance etc.
7. Uses of Potentiometers and Bridges (Electrical)..
8. Experiments connected with diodes and transistor.
9. Measurement of energy band gap of semiconductor.
10. Other conceptual experiments related to theory syllabus.

Reference Books: -
1. Engineering Physics- V. S. Yadava, TMH
2. A T.B. of Optics by Brijlal and Subhraininyan.
3. Optics By Ghatak, TMH
4. Engineering physics by M.N. Avadhanulu and P.G. Kshirsagar. S. Chand & Co.
5. Fundamentals of engineering physics by P. Swarup, Laxmi Publications.
6. Atomic and Nuclear physics by Brijlal and Subraminiyan.
7. Introduction to atomic and nuclear physics- Harvey E. White- East-West Press, New Delhi.
8. Concepts of Modern Physics- Beiser, TMH
9. Laser Electronics – Verdryan, Eastern-Wiley and Sons.

BE204 Basic Mechanical Engineering Syllabus RGPV/RGTU BE 1st/2nd semester Syllabus

Rajiv Gandhi Technological University, Bhopal (MP)

Course: BE204 Basic Mechanical Engineering
Branch: Common Semester BE 1st/2nd semester Syllabus

Revised Syllabus and Scheme of Examination Effective from July 2007

Unit I
Materials: Classification of engineering material, Composition of cast iron and carbon steels on Iron- Carbon diagram and their mechanical properties. Alloy steels and their application. Stress-strain diagram, Hooks law and modulus of elasticity. Tensile, shear, hardness and fatigue testing of materials

Unit II
Measurement: Temperature, pressure, velocity, flow strain, force and torque measurements, concept of measurement error & uncertainty analysis, Vernier caliper, micrometer, dial gauges, slip gauges, sinebar and combination set. Introduction to lath, drilling, milling and shaping machines.

Unit III
Fluids: Fluid properties pressure, density and viscosity. Pressure variation with depth, static and kinetic energy, Bernauli’s equation for incompressible fluids, Viscous and turbulent flow, working principle of fluid coupling, pumps, compressors turbines, positive displacement machines and pneumatic machines. Hydraulic power & pumped storage plants for peak load management as compared to base load plants.

Unit IV
Thermodynamic: First and second law of thermodynamic; steam properties, steam processes at
constant pressure, volume, enthalpy & entropy, classification and working of boilers, efficiency &
performance analysis, natural and artificial draught, calculation of chimney height. Refrigeration, vapor absorption & compression cycles, coefficient of perform (COP), refrigerant properties & eco friendly refrigerants.

UNIT V
Reciprocating Machines: Steam engines, hypothetical and actual indicator diagram, Carnot cycle and ideal efficiency, Otto and diesel cycles, working of two stroke & four stroke petrol & diesel IC engines.

Reference Books: -
1. Material Science- Narula TMH.
2. Fluid Mechanics and Machinery- Agrawal, TMH
3. Instrumentation and Measurements by Nakra and Chaudhary.TMH
4. Engineering Thermodynamic by P.K. Nag, Tata McGraw Hill
5. Internal Combustion Engines- Ganesan, TMH.

List of suggestive core Experiments:
Theory related eight to ten experiments including core experiments as follows:

1. Tensile testing of standard mild steel specimen.
2. Experiment on Bernoulli’s theorem.
3. Linear and angular measurements using, Vernier, micrometer, slip gauge, dial gauge and sine-bar.
4. Study of different types of boilers and mountings.
5. To find COP of a refrigeration unit.
6. Study of different IC engines.

BE205 Basic Civil Engineering Syllabus RGPV/RGTU BE 1st/2nd semester Syllabus

Rajiv Gandhi Technological University, Bhopal (MP)

Course: BE101 Engineering Chemistry Syllabus
Branch: Common Semester BE 1st/2nd semester Syllabus

Revised Syllabus and Scheme of Examination Effective from July 2007

Related: BE101 Engineering Chemistry Syllabus (Theory)

List of suggestive core Experiments:

Students are expected to perform minimum ten experiments from the list suggested below by
preferably selecting experiments from each unit of syllabus.

1. To perform chain survey of a given area for locating existing ground features.
2. To draw the profile of a building by chain surveying method.
3. To perform traverse surveying with prismatic compass, check for local attraction and determine corrected bearings and to balance the traverse by Bowditch’s rule.
4. To perform leveling exercise by Height of instrument of Rise and Fall method.
5. To find out of the Reduced Level(R.L.) of the top of the building using Theodolite.
6. To measure horizontal and vertical angles in the field by using Theodolite.

Reference Books:
1. Basic Civil Engineering- Palanichamy, TMH
2. Basic Civil Engineering by S. Ramamrutam & R. Narayanan - Dhanpat Rai Pub., New Delhi.
3. Surveying by Duggal – Tata McGraw Hill New Delhi.
4. Building Construction by S. C. Rangwala - Charotar Publications House, Anand.
5. Building Construction by Gurucharan Singh - Standard Book House, New Delhi
6. Global Positioning System Principles and applications – Gopi , TMH
7. To perform plane table leveling exercises by Radiation/Intersection/ Traversing etc. method.
8. To determine(a) normal consistency(b) Initial and Final Setting time of a cement sample.
9. To determine the workability of fresh concrete of given proportions by slump test or compaction factor test.
10. To determine the Compressive strength of concrete of given proportions.
11. To determine the Compressive strength of bricks.
12. To test the efflorescence of bricks.
13. To determine particle size distribution and fineness modulus of coarse and fine aggregate.
14. Determine bulk modulus for bulking of fine aggregate sand.

BE203 Engineering Mechanics Syllabus RGPV/RGTU BE 1st/2nd semester Syllabus

Rajiv Gandhi Technological University, Bhopal (MP)

Course: BE101 Engineering Chemistry Syllabus(EM)
Branch: Common Semester BE 1st/2nd semester Syllabus

Revised Syllabus and Scheme of Examination Effective from July 2007

Related: BE203 Engineering Mechanics Syllabus (Theory)

List of suggestive core Experiments:
Students are expected to perform minimum ten experiments from the list suggested below by preferably selecting minimum one experiment from each unit of syllabus.

1. To verify the law of Triangle of Forces and Lami’s theorem.
2. To verify the law of parallelogram of forces.
3. To verify law of polygon of forces
4. To find the forces in members of a simple jib crane and to compare them with theoretical values.
5. To find the support reactions of a given truss and verify analytically.
6. To verify the law of moments by rotating disc apparatus.
7. To verify the law of moments using a bell crank lever.
8. To determine the velocity ratio, mechanical advantage, and efficiency of a given single purchase crab winch.
9. To determine for the given wheel and exle. (i) the velocity ratio (ii) mechanical advantage and (iii) efficiency, and to plot the curves of load against mechanical advantage, efficiency, actual effort and ideal effort.
10. To determine for the given worm and worm wheel the velocity ratio, mechanical advantage and efficiency and to plot the curves of load against mechanical advantage, efficiency and actual effort.
11. To determine for the given Screw Jack the velocity ratio, mechanical advantage, efficiency, and to plot the curves of load against mechanical advantage efficiency, actual effort and ideal effort.
12. To determine the coefficient of friction between two given materials by inclined plane method.
13. To find the coefficient of friction between belt and pulley and rope and pulley.
14. To determine support reaction and shear force at a given section of a simply supported beam and verify in analytically using parallel beam apparatus.
15. To find out the centroid of plane areas graphically and verify it analytically.
16. To determine the centroid of plane areas graphically and verify it analytically.
17. To determine the moment of inertia of fly wheel by falling weight method.

Text Books:
1. Beer & Johnson, Vector Mechanics for Engineers - Statics, Tata Mc Graw Hills New Delhi.
2. Timoshenko-Engineering Mechanics, TMH
3. R.C. Hibbler – Engineering Mechanics: Statics & Dynamics.
4. A. Boresi & Schmidt- Engineering Mechanics: Statics & Dynamics, Thomson’ Books
5. Shames- Engineering Mechanics-statics dynamics, Pearson Education.
6. Dr. K.L. Kumar, Engineering Mechanics, Tata Mc Graw Hills New Delhi
7. Shelley- 800 Solved Problems in Vector Mech. for engineers Vol-1 Statics, Schaum Series, TMH
8. R.K. Rajput, Engineering Mechanics S. Chand & Co.
9. G. L.Meriam- Engineering Mechanics-Statics, Wielly India.

BE104 Basic Electrical Engineering Syllabus List of practicals RGPV/RGTU BE 1st/2nd semester Syllabus

Rajiv Gandhi Technological University, Bhopal (MP)

Course: BE104 Basic Electrical Engineering Syllabus
Branch: Common Semester BE 1st/2nd semester Syllabus

Revised Syllabus and Scheme of Examination Effective from July 2007

Related: BE104 Basic Electrical Engineering Syllabus (Theory)

List of suggestive core experiments:
1. Verification of KCL & KVL.
2. Verification of Thevenin’s Superposition theorem.
3. Measurement of active and reactive power in 1-phase and 3-phase.
4. Study of transformer, name plate rating, determination of ratio and polarity.
5. Determination of equivalent circuit parameters of a single phase transformer by 0.C. and S.C. tests and estimation of voltage regulation and efficiency at various loading conditions and verification by load test.
6. Study of constructional features of dc machines.
7. Separation of resistance and inductance of choke coil.
8. Measurement of various line & phase quantities for a 3- phase circuit.

Reference Books:-
1. Mittle and Mittal- “Basic Electrical Engineering" 2/e TMH
2. HUGHES Electrical Technology – Pearson
3. A.E. Fitzgerald, C. Kingsley and Umans, "Electrical Machinery", McGraw Hill, 5th Edition, 1992.
4. Vincent Del Toro, "Principles of Electrical Engineering ", Prentice Hall, 1987.
5. Kothari and I.J. Nagrath, "Basic Electrical Engineering", 2/e Tata McGraw Hill.
6. Kothari and I.J. Nagrath, "Electric Machines", 3/e Tata McGraw Hill.
7. Mittle and Mittal- “Basic Electrical Engineering" 2/e TMH
8. Cathey- Basic Electrical Engineering, Schaum Series, TMH

RGPV / RGTU CS 601 Micro Processor and Interfacing, List of Experiments and suggested Reading or Refrence books

Tags: List of Experiments, RGPV BE syllabus, B.E., Refrence Books, List of Experiments, Micro Processor and Interfacing

RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
B.E. Computer Science & Engineering, VI Semester
Course Syllabus : CS 601 Micro Processor and Interfacing

Syllabus: CS 601 Micro Processor and Interfacing

List of Experiments :
1. Add a data byte located at offset 0500H in 2000H segment to another data byte available at
06000H in same segment and store the resulting 0700H in same segment?

2. Add the contents of memory location 2000H, offset 0500H to the contained of accumulator.

3. Write a program to find the average to two temperature name HI-TEMP and LO-TEMP and
puts the result in the memory location AV-TEMP.

4. Find out the largest number from an unordered array of sixteen 8-bit numbers stored
sequentially in the memory locations starting at offset 0500H in the segment 2000H

5. Move a byte string, 16 bytes long, from the offset 0200H to 0300H in the segment 7000H.
6. Write a program to add a profit factor to each element in a cost array and puts the result in a
PRICES array, where profit factor is 15H and COST =20H, 28H, 15H, 26H, 19H, 27H, 16H,
29H.
7. Write a program to find out the number of positive numbers and negative numbers from a
given series of signed numbers.
8. Write a program that performs the addition, subtraction, multiplications, division of the given
operands. Perform BCD operation for addition and subtraction.
9. A Program to find out the number of even and odd numbers from a given series of 16 bit
hexad4ecimal numbers.

Suggested Reading:
1. Douglas V Hall, “Microprocessors and interfacing – Programming & Hardware” TMH
2. Barry B. Brey, “The intel Microprocessor – 8086”, Pearson Education
3. Kenneth J.Ayala,”The 8086 Microproccessor: Programming & Interfacing The PC”,Cengage
Learning
4. Krishna Kant,”Microprocessors and Microcontrollers”, PHI Learning
5. A.K.Ray KM Bhurchandi, “Advanced Microprocessor and peripherals” McGraw Hill
6. R.S. Gaonkar ,”Microprocessors and interfacing”, TMH