EX 6th sem Minor Project Syllabus EX 606 Minor Project Syllabus

RGTU/RGPV EX-606 Minor Project Syllabus

RGTU/RGPV  Minor Project SYLLABUS

Electrical & Electronics Engineering EX 6th Semester Syllabus

RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
PROGRAMME: Electrical & Electronics Engineering
COURSE: EX-606 Minor Project

COURSE GUIDELINES

The Minor Project Work provides students an opportunity to do something on their own and under the supervision of a guide. Each student shall work on an approved project, which may involve fabrication, design or investigation of a technical problem that may take design, experimental or analytical character or combine element of these areas. The project work involves sufficient work so  that students get acquainted  with different aspects of manufacture, design or analysis.   The students also have to keep in mind that in final semester they would be required to implement whatever has been planned in the Major Project in this semester. It is possible that a work, which involves greater efforts and time may be taken up at this stage and finally completed in final semester, but partial completion report should be submitted in this semester and evaluated also at the end of the semester. At the end of semester, all students are required to submit a synopsis and be assessed by an external examiner. 

EXI 6th sem Energy Conservation & Management Syllabus EX 605 Energy Conservation & Management Syllabus

RGTU/RGPV EX-605 Energy Conservation & Management Syllabus

RGTU/RGPV  Energy Conservation & Management SYLLABUS

Electrical & Electronics Engineering EX 6th Semester Syllabus

RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
PROGRAMME: Electrical & Electronics Engineering
COURSE: EX-605 Energy Conservation & Management

UNIT-I
General energy problem: Energy use patterns and scope for conservation. Energy audit: Energy monitoring, Energy  accounting and analysis, Auditing and targeting. Energy conservation policy,  Energy management & audit, Energy audit, Types of energy audit, energy management (audit), qualities and function of energy managers, language of an energy manager, Questionnaire, Check list for top management, Loss of energy in material flow, energy performance, Maximizing system efficiency, Optimizing, input energy requirements, Energy auditing instruments, Material load energy balance diagram.
 

Unit-II
Thermodynamics of Energy Conservation. Basic principle. Irreversibility and second law efficiency analysis of systems. Primary energy sources, optimum use of prime-movers, energy efficient house keeping, energy recovery in thermal systems, waste heat recovery techniques,  thermal insulation. Thermal energy audit in heating, ventilation and air conditioning. Maintenance and Energy audit – friction, lubrication and tribo-logical innovations. Predictive and preventive maintenance.
 

Unit-III
Load curve analysis & load management DSM, Energy storage for power systems (Mechanical, Thermal, Electrical & Magnetic) Restructuring of electric tariff from energy conservation consideration, Economic analysis depreciation method, time value of money, Evaluation method of projects, replacement analysis, special problems inflation risk analysis.  Pay back period, Energy economics, Cost Benefit Risk analysis, Pay back period.
 

UNIT-IV
Energy efficient electric drives, Energy efficient motors V.S.D. power factor improvement in power system. Energy Conservation in transportation system especially in electric vehicle. Energy flow networks, Simulation & modeling, formulation & Objective & constraints, alternative option, Matrix chart.

Unit-V
Energy conservation task before industry, Energy conservation equipments, Co-Generation, Energy conservation process, Industry Sugar, Textiles, Cement Industry etc Electrical Energy Conservation in building, heating and lighting. domestic gadgets

EX 601 Energy Conservation & Management References: 
1.  Energy Management – W.R. Murphy & G. Mckey Butler worths.
2.  Energy Management Head Book- W.C. Turner, John Wiley
3.  Energy Management Principles- Craig B. Smith, Pergamon Press
4.  Energy Conservation- Paul O Callagan- Pergamon Press
5.  Design & Management of energy conservation. Callaghan,
6.  Elect, Energy Utilization & Conservation. Dr. Tripathi S.C.,

EXI 6th sem Electronic Instrumentation Syllabus EX 604 Electronic Instrumentation Syllabus

RGTU/RGPV EX-604 Electronic Instrumentation Syllabus

RGTU/RGPV  Electronic Instrumentation SYLLABUS

Electrical & Electronics Engineering EX 6th Semester Syllabus

RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
PROGRAMME: Electrical & Electronics Engineering
COURSE: EX-604 Electronic Instrumentation

Unit-I

Introduction to CRO, Different parts of CRO, Its Block diagram, Electrostatic focusing, Electrostatic deflection, post deflection acceleration, Screen for CRTs, Graticule, Vertical & Horizontal deflection system, Time base circuit, Oscilloscope probes and transducers, Attenuators, Application of CROs, Lissajous patterns, Special purpose CROs- Multi input, Dual trace, Dual beam, Sampling, Storage (Analog & Digital) Oscilloscopes.

Unit-II- A.C. Bridge Measurement

Sources and detectors, Use of Bridges for measurement of inductance, Capacitance &Q factor Maxwells bridge, Maxwells inductance capacitance bridge, Hays bridge,Andersons bridge, Owen's Bridge, De-sauty's Bridge, Schering Bridge, High Voltage Schering bridge, Measurement of relative permittivity, Heaviside cambell's bridge, Weins bridge, Universal bridge, Sources of errors in Bridge circuit, Wagner's Earthing device, Q meter and its applications and measurement methods. 

Unit-III- Transducers

Transducers definition and classification, mechanical devices as primary detectors, Characteristic & choice of Transducers, Resistive inductive and capacitive transducers, strain gauge and gauge factor, Thermistor, Thermo couples, LVDT, RVDT, Synchros, Piezo-Electric transducers, Magnet elastic and magnetostrictive Hall effect transducers, Opto-electronic transducers such as photo voltaic, Photo conductive, photo diode and photo conductive cells, Photo transistors, Photo optictransducers. Introduction to analog & Digital data acquisition systems- Instrumentation systems used, Interfacing transducers to electronic control & measuring systems Multiplexing - D/A multiplexing A-D Multiplexing, Special encoders. Digital control description 

Unit-IV- Signal Generators

Fixed & variable frequency AF oscillators, Sine wave generators, Standard signal generator, AF Sine and Square wave generator Function generator, Square and pulse generator, Random noise generator, Sweep generator, TV Sweep generator, Marker generator, Sweep- Marker generator, Wobblyscope, Video pattern generator Vectroscope, Beat frequency oscillator

Wave analyser

Basic wave analyzer, Frequency selective wave analyzer, Heterodyne wave analyzer, Harmonic distortion, analyzer, spectrum analyzer digital Fourier analyzer.

Unit-V - Digital Instruments

Advantages of Digital instruments over analog instruments, resolution and sensitivityof Digital meters., Digital Voltmeter - Ramp type, Dual slope integration type,Integrating type, Successive approximation type, Continuous balance DVM or Servobalancing potentiometer type VM. , compression of Electronic & Digital Volt meter,Digital Multimeter, Digital frequency meter, Time period measurement, High frequency measurement, Electronic counter, Digital tachometer, Digital PH meter,

Digital phase meter, Digital capacitance meter. 

Digital display system and indicators like CRT, LED, LCD, Nixies, Electroluminescent, Incandescent, Electrophoretic image display, Liquid vapour display dot-matrix display, Analog recorders, X-Y recorders. Instruments used in computer-controlled instrumentation RS 232C and IEEE 488, GPIB electric interface.

EX 604 Electronic Instrumentation List of Experiments:-
1.  Measurement of inductance of a coil using Anderson Bridge.
2.  Measurement of capacitance of a capacitor using schering bridge.
3.  LVDT and capacitance transducers characteristics and calibration.
4.  Resistance strain gauge- Strain Measurement and calibration.
5.  Measurement of R,L,C & Q using LCR-Q meter.
6.  Study & measurement of frequency using Lissajous patterns.
7.  Measurement of pressure using pressure sensor.
8.  Study of Piezo-electric Transducer and Measurement of impact using Piezo-electric Transducer
9.  Measurement of Displacement using LVDT.
10. Measurement of speed of a Motor using photoelectric transducer.
11. Study & Measurement using ph meter.
12. Temperature measurement & Control using thermo couple & using thermistor.

EX 604 Electronic Instrumentation References:
1.  Albert. D. Helfrick, W.D. Cooper, Modern Electronic Instrumentation and measurement techniques, PHI.
2.  Kalsi H.S., Electronic Instrumentation, TMH.
3.  A.K. Sawhney, Electrical and Electronic measurements and Instrumentation, Dhanpat Rai and Co.
4.  E.W. Golding, Electrical Measurement and Measuring Instruments Sir Isaac Pitman and Sons, Ltd. London 1940
5.  C.S. Rangan, G.R. Sarma, V.S.V. Mani, Instrumentation Devices and Systems Tata McGraw-Hill Publishing  Company Ltd.

7.  B.C. Nakra, K.K. Choudhry,  Instrumentation, Measurement and Analysis Tata
McGraw-Hill Publishing CompanyLtd.
8.  Morris A.S., Principles of Measurement & Instrumentation, PHI
9.  Murthy BVS, "Transducers and Instrumentation", PHI.
10.  Doeblin D.O., Measurement Systems- Applications and Desig Albert D. Helfrick, William D.Cooper, Modern Electronic Instrumentation and Measurement Techniques Pearson Education.

EXI 6th sem COMMUNICATION ENGINEERING Syllabus EX 160 COMMUNICATION ENGINEERING Syllabus

RGTU/RGPV EX-601 COMMUNICATION ENGINEERING Syllabus

RGTU/RGPV  COMMUNICATION ENGINEERING SYLLABUS

Electrical & Electronics Engineering EX 6th Semester Syllabus

RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
PROGRAMME: Electrical & Electronics Engineering
COURSE: EX-601 COMMUNICATION ENGINEERING

Unit-1.  Fourier series, Fourier Transform and its properties, Probability, random variables &their moments, their significance, convolution, auto correlation, cross Correlation &power spectral density, Gaussian & Rayleigh probability density Function, mean,variance & standard deviation, central limit theorem, voltage & Power decibel scales.Signal Processing : Types of signal, deterministic & random, periodic & non Periodic,analog & discrete, energy & power signals, Representation of sinusoid in differentforms & their conversion

Unit-2 Need of modulation in a communication  system, block schematic of a typicalCommunication system. AM modulation system, modulation index, generation &detection of AM wave, side bands & power content in an AM wave, DSB-SC, SSB,their methods of generation & detection, vestigial side Band modulation, AMtransmitter block diagram, comparison  of various AM system, modulation &demodulation circuits. Relationship between phase & freq. modulation, FM wave &its spectrum, phasor diagram of a narrow band FM signal, wide band FM, methods ofgeneration & detection of FM, discriminators, pre-emphasis & de-emphasis,Stereophonic FM broadcasting, FM transmitters.

Unit-3 TRF receiver & its limitations, necessity of heterodyning, super heterodyningReceivers, IF amplifiers, selection of intermediate frequency. RF amplifiers, detectors,AGC, AVC, FM receivers, AFC.

Unit-4 Nyquist sampling theorem, TDM, pulse modulations & PCM, quantization error,necessity of non linear quantizer, A-law, µ-law, FSK & PSK, QPSK, QAM. Source ofnoise, noise figure, noise bandwidth, effective noise temperature, performance of AM,FM & digital system in presence of noise.

Unit-5 Satellite system block diagram, satellite freq. bands, satellite multiple access Formatlike TDMA, FDMA, transponders, earth station & satellite eclipses, Link calculation

EX 601 COMMUNICATION ENGINEERING References:

1.  Taub & shilling, Communication System, TMH

2.  Singh & Sapre, Communication System, TMH

3.  B.P. Lathi, Modern Digital and ana communication system, 

4.  Simon Haykins, Communication System. John Willy

5.  Wayne Tomasi, Electronic Communication system. 

6.  Schaum outline Series, Analog and digital communication

7.  Martin S. Roden, Analog & Digital Communication System., Discovery Press.

8.  Frank R. Dungan, Electronic Communication System, Thomson/Vikas

9.  John G. Prokis,Masoud Salehi, Gerhard Bauch, Contemporary communication

sytems using MATLAB, Cengage learning 2004.

EXI 6th sem Control Systems Syllabus EX 602 Control Systems Syllabus

RGTU/RGPV EX-602 Control Systems Syllabus

RGTU/RGPV  Control Systems SYLLABUS

Electrical & Electronics Engineering EX 6th Semester Syllabus

RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA, BHOPAL
PROGRAMME: Electrical & Electronics Engineering
COURSE: EX-602 Control Systems

Unit-I

Modeling of dynamic systems: Electrical, Mechanical and hydraulic systems, Conceptof transfer function, Simulation of differential equations in analog computer, Statespace description of dynamic systems: Open and closed loop systems, Signal flow graph, Mason’s formula, Components of control systems: Error detectors (Synchros &Potentiometer), Servomotors (AC & DC), techo generators, power amplifier, steepermotors

Unit-II

Time – domain analysis of closed loop systems: Test signals, time response of firstand second order systems, Time domain performance specifications, Steady stateerror & error constants Feedback control actions: Proportional, derivative and integralcontrol.

Solution of state equation: Eigen values & eigenvectors digitalization state transitivematrix, stability Routh-Hurwit stability analysis.

Unit-II

Characteristics equation of closed loop system root loci, construction of loci, Effect ofadding, poles and Zeros on the loci, Stability by root loci.

Unit-IV

Frequency, Domain analysis, Bode plots, Effect of adding, poles and Zeros, Polarplot, Nyquist stability analysis, Relative stability : Gain and phase margins.

Unit-V

Frequency- Domain compensation : lead lag, Lag-lead compensation, Design ofcompensating networks

EX 601 Control Systems List of Experiments:

• Time response of second order system.
• Characteristics of Synchros.
• Effect of feedback on servomotors.
• Determination of transfer function of A-C servomotor
• Determination of transfer function of D-C motor. 
• Formulation of PI & PD controller and study of closed loop responses of 1st and 2nd order dynamic systems.
• State space model for classical transfer function using MATLAB.
• Simulation of transfer function using operational amplifier.
• Design problem: Compensating Networks of lead and lag.
• Temperature controller using PID.
• Transfer function of a DC generator.
• Characteristics of AC servomotor.
• Use of MATLAB for root loci and Bode plots of type-1, type-2 systems.
• Study of analog computer and simulation of 1st order and 2nd order dynamic equations.
• Formulation of proportional control on 1st order and 2nd order dynamic systems.
• Feed back control of 3rd order dynamic Systems
• Study of lead and lag compensating networks.
• Effect of adding poles & zeros on root loci and bode plots of type-1, type-2 systems through MATLAB.

 EX 602 Control Systems  References:  

• I.J. Nagrath and M. Gopal, Control system Engineering, New Age International.   
• K. Ogata, Modern Control Engineering, PHI.   
• B.C. Kuo, Automatic Control systems, PHI   
• Gopal M., Control System : Principles & Design, TMH Third edition 2008.   
• Stefani, Shahian, Savant, Hostetter, “Design of feed back control System’s”, Oxford.   
• Krishna. K. Singh & Gayatri Agnihotri, System Design through MATLAB control tool & Simulink, Stringer Verlag, U.K.   
• Rudra Pratap, Getting Started with MATLAB, Oxford.   
• Modern Control Systems by Roy Chaudhary, PHI.   
• Les Finical, Control Systems,Cengage learning,India Edition 2007.   
• Stephen J.Chapman, MATLAB Programming for Engineers, Cengage learning,India Edition 2004.